Transmission Line Routing and Design

 
12-13th March, Vancouver, 23-24th March, Calgary, 26-27th March, Toronto

OverviewAgendaCourse LeaderRegisterVenueContact

ABOUT THE COURSE

The Transmission Line Routing and Design course is designed to give a wide understanding of incident investigation process. It will provide you with ample examples of implementation of serious incident investigation practices. This entire course will cover accidents investigations, the process of gathering evidence, interviews & analysis of the evidence. Participants will have a thorough understanding about the benefits of accident prevention & human factor potential influence in the investigation & over the reporting process. It will enable the deputies to better identify activated incident investigation. This training will provide representatives with significant updates on the investigation process, safeguarding the efficiency of investigating the serious incident investigation process, communication & therefore learning from the things that may go wrong within one’s’ organization.

Learning Objectives

  • Judging what, when & how to report a serious incident.
  • Learning the broad knowledge on investigation legislations, responsibilities & principles
  • Safety Regulations to be followed during an accident & an insight on post incident responsibility of employers
  • How to objectify & gather specific data during the investigation & distinguishing them on the account of reliability & credibility.
  • Conceding influence of human factors- How they impact Investigations & Reporting
  • Outlook on the awareness of the different responses to serious incidents, techniques to increase incompetence in interviewing staff under such conditions.
  • Studying potential barriers in between a good investigation
  • Successful Strategies for improving effective investigation practices

Target Audience

Anyone involved in the process of investigating incidents and accidents.

COURSE OUTLINE

Transmission Line Routing and Design


Vancouver, Calgary, Toronto

DAY 1
 
 
1 Session: Power System

 

  • Transmission in electric power system
  • Electric power fundamental
 
2 Session : Transmission line basics

 

  • Overhead transmission line configuration
  • Single and Double circuits
  • Bundled conductor
  • Underbuild
  • Shield Wire
Morning Coffee Break (20 Minutes)
 
 
3 Session: Transmission line basics

 

  • Structure Types
  • Tangent Structures
  • Angles and Dead End structures
  • Guyed versus self-supporting dead end structures
 
4 Session: Structure components and Materials

 

  • Wood, Steel and Lattice towers
  • Cross arms and cross braced
  • Other structure components
  • Slip versus bolted connection
Lunch Break (1 Hour)
 
 
5 Session: Insulation

 

  • Porcelain
  • Toughened glass
  • Composite
 
6 Session: Conductor

 

  • Copper Conductorr
  • Aluminum Conductor
  • Steel Conductor
  • Bi-Metallic Conductor (ACSR – Aluminum conductor steel reinforced)
  • Composite Conductor
Afternoon Coffee Break (20 Minutes)
 
 
7 Session: Other transmission line components

 

  • Spacer Dampers
  • Vibration Dampers
  • Suspension clamp
  • Dead end
  • Marker Balls
 
8 Session: Foundation

 

  • Direct embedment
  • Concrete foundation
  • Anchors
  • Guying
 
END OF DAY 1

 

DAY 2
 
 
9 Session: Transmission design process

 

  • Needs
  • Function requirements
 
10 Session: Design phases

 

  • Phase 1: Conceptual
  • Phase 2: Preliminary design (Definition)
  • Phase 3: Detailed design
  • Phase 4: Construction
Morning Coffee Break (20 Minutes)
 
 
11 Session: Transmission line design

 

  • Transmission design Products / deliverable
  • Stakeholders
 
12 Session: Transmission line design

 

  • Design tools
  • Technical standards and references
Lunch Break (1 Hour)
 
 
13 Session: Transmission line design inputs

 

  • Weather cases
  • Design criteria
  • Coordinate systems
 
 
14 Session: Line design

 

  • Line design terminology
  • Design criteria
  • Line layout best practices
Afternoon Coffee Break (20 Minutes)
 
 
15 Session: Line design

 

  • TSag and tension
  • Wood poles
  • Steel poles
 
16 Session

 

  • Route selection
  • Wrap up summary
  • Open Discussion
 
END OF COURSE

 

   

Owner/Transmission Line Consultant HK Powerline Consulting Inc

Our Trainer is a professional electrical engineer and a highly experienced and knowledgable with over 25 years of experience in the design, asset management and construction support of transmission and distribution lines at voltage levels from 25 to 500 kV. Work experience includes most aspects of transmission and distribution line design with specialization in the areas of line layout, routing, line design, project specifications, development of design standard, foundations and structure design, conductors, insulators, and hardware evaluation and selection. Significant expertise in the areas of transmission and distribution Asset Management including the development of maintenance standards, Asset Management policies and strategies, Asset Health Index and asset replacement and maintenance strategies. In the last 12 years, I have been a consultant engineer and a team lead for several major transmission lines design projects within Canada including major utilities and consulting firms such as BC Hydro, SaskPower and SNC Lavalin to deliver transmission line projects. I have been also, the transmission lines subject matter export / Owner engineer for multiple major projects within Canada.

He has facilitated many training courses,workshops and conferences related to transmission lines and has been involved in over 100 major transmission line routing/design and construction support in many countries. He has contributed to the development of Canadian technical standards for overhead conductors and insulators as part of the Canadian Standard Association (CSA), and participate as a member of Institute of Electrical and Electronics Engineers (IEEE).

Hold a bachelor degree in engineering science (Civil Engineering) from the University of Cairo in Egypt and a Bachelor degree in electrical engineering from the University of Western Ontario in Ontario, Registered as professional engineer with multiple provinces within Canada including BC and SK. Also, registered as a consultant engineer and have been active member of CSA and IEEE committees.

 

 

 

 

Delegate
 
Price AUD
Vancouver (12-13th March, 2019)

Calgary (23-24th March, 2019)

Toronto (26-27th March, 2019)

 

Registration fee only covers cost of all sessions, luncheon, coffee/tea & presentations. Fee does NOT include any travel or accommodation expenses. Fee is not inclusive of 8% Admin/Bank Charges.

 

Venue:

Venue (4-5 star Hotel) will be confirmed 4-6 weeks prior to the event to ensure we choose the best space for you, as the number of attendees varies significantly. Also, please note there will be a discounted accommodation rate for attendees.

Name (required)

Email (required)

Phone Number(with country code): (required)
-

Select Event (required)

Subject

Your Message

Our Clients